FoamHalo Max

Capacity: 10.1 fl oz (300 ml)

Dimensions: Approximately 5.1 × 5.1 × 2.4 in (13 × 13 × 6 cm), width × height × depth

Dispensing: Touchless, automatic foam

Foam settings: Three adjustable levels

Water resistance: IPX5-rated for splashes. Do not submerge

Power: Built-in 2,000 mAh rechargeable battery with USB-C charging

Installation: Wall-mounted using the included adhesive pad

• FoamHalo dispenser
• Adhesive mounting pad
• USB-C charging cable

Power: Press and hold the button to turn FoamHalo on or off.

Foam amount: Press the button once to cycle through settings 1, 2 and 3.

Temperature units: Double-press the button to switch between °F and °C.

Display: The large digits show temperature or battery charge (%). The small number indicates the selected foam setting.

Mount FoamHalo without drilling using the included adhesive pad.

Choose a smooth, flat surface, such as tile or marble. Clean and dry the surface thoroughly, then apply the mounting pad and press firmly for 30 seconds.

For the strongest hold, allow the adhesive to set before attaching the dispenser.

Use ready-to-use foaming hand soap, or dilute liquid hand soap before filling.

Start with 3 parts water to 1 part liquid hand soap. The dilution needed varies with the soap’s thickness; adjust if necessary for consistent foam.